.. _GUI_network: ======= Network ======= Setup IP address ---------------- 1. Configure a network adapter with a static IP address as follows. IP address: :: 192.168.1.1 Netmask: :: 255.255.255.0 2. Usually a USB to network adapter is used. However, keep in mind, that these adapters commonly have only 100MBit/s. a. Configure the used network adapter as shown in the figure. b. Connect this network adapter to the UltraZohm system by a standard RJ45 cable. .. image:: ./images_network/network0.png Known issues ------------ .. warning:: * Sometimes the VPN connections makes problems. * If no connection can be achieved with the JavaScope, close the VPN connection. You can open it again after a connection with the GUI has been established. See also """"""""""""""" * `buy e.g. Ethernet to USB Adapter (TP-Link USB 3.0 Gigabit LAN Adapter (UE300)) `_ Checked by """"""""""" Sebastian Wendel (THN) in 08/2018