Setup IP address

  1. Configure a network adapter with a static IP address as follows.

IP address:

  1. Usually a USB to network adapter is used. However, keep in mind, that these adapters commonly have only 100MBit/s.

    1. Configure the used network adapter as shown in the figure.

    2. Connect this network adapter to the UltraZohm system by a standard RJ45 cable.


Known issues


  • Sometimes the VPN connections makes problems.

  • If no connection can be achieved with the JavaScope, close the VPN connection. You can open it again after a connection with the GUI has been established.

See also

Checked by

Sebastian Wendel (THN) in 08/2018