Network

Setup IP address

1. Configure a network adapter with a static IP address as follows.

IP address:

192.168.1.1

Netmask:

255.255.255.0

2. Usually a USB to network adapter is used. However, keep in mind, that these adapters commonly have only 100MBit/s.

   1. Configure the used network adapter as shown in the figure.

   2. Connect this network adapter to the UltraZohm system by a standard RJ45 cable.

   

Known issues

Warning

• Sometimes the VPN connections makes problems.

• If no connection can be achieved with the JavaScope, close the VPN connection. You can open it again after a connection with the GUI has been established.

See also

• buy e.g. Ethernet to USB Adapter (TP-Link USB 3.0 Gigabit LAN Adapter (UE300))

Checked by

Sebastian Wendel (THN) in 08/2018